TeckWrap Spectra: is a smoked headlight and taillight tint film built for drivers who want the dark lens look without losing usable night vision. 54% VLT keeps your low beams sharp and fully usable at night. The 330μm build handles rocks and road debris without cracking and flexes over compound curves without lifting. Henkel acrylic adhesive at approximately 2,200g/inch bonds flat against the lens, resists edge lifting, and removes residue-free when you are ready to change it 99% UV block stops yellowing and optical hazing before they start, so the film holds its clarity for years, not months. Cheap tint films make you choose between the look and your visibility. Most yellow out or start lifting before the first winter is over. Spectra THL55 does not work that way.

Key Attribu es: t:

• Thickness that protects: 330μm total build with a 210μm application layer (8.27mil). The film stands up to rocks and road debris without cracking, yet flexes easily over complex curves.
• Grip that stays put: Henkel acrylic adhesive delivers ≈2200g/inch peel strength. It bonds tight to the lens, resists lifting at the edges, and peels off residue-free when you switch styles.
• Clarity you can see through: 54% light transmission keeps your night vision intact. The ≈1.5% haze and ≈90% gloss keep the beam crisp and the surface mirror-bright.
• UV defense that lasts: 99% UV block stops yellowing and hazing dead in its tracks. The film stays optically clear for years, not months.
• Strength that absorbs impacts: 18MPa tensile strength and 350% elongation. The film stretches around tight headlight housings and absorbs minor impacts without tearing.

Visual Performance: 90% gloss gives the lens a deep, reflective finish in daylight. At night, 54% VLT keeps your low beams sharp and focused. Ultra-low 1.5% haze means no diffusion, no fog just a usable beam on dark roads.

Application & Fitment: 350% elongation handles tight curves on European and Asian headlight housings without resistance. The PET release liner holds the film flat under tension during install for a clean, bubble-free finish. The 0.4m x 15M roll covers multiple sets.

Ready to Transform Your Ride?: Stop settling for boring lights or brittle films. Order Spectra today and see why real drivers choose a headlight tint that actually works.

Film Construction

• Film Type: Headlight film automotive window film
• Film Thickness: 2 mil
• Release Liner: Protective release liner
• Adhesive: Optically clear pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +80°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty depends on film series, glass condition, installation method, and local climate.

• Application temperature: +15°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: automotive side glass, rear glass, and windshield applications where allowed
• Post-heat: heat-shrink as needed
• Cure: allow full drying before heavy cleaning
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.