Most pink wraps go one of two ways, bubblegum bright or washed-out pastel. Cashmere Rose isn't either. It's a soft, warm pink with a subtle sheen that reads as elegant, not toy-like.

Key Attributes

Pink that stays grown-up: soft rose tone with fine metallic pigment. Holds its warmth in any light. Never goes neon or chalky Paint protection built in: clear top coat shields against stone chips, scratches, and road debris. Keeps your factory paint pristine underneath Gloss that doesn't wash out: Sharp reflection, no orange peel, no milky haze Clean chemistry: Henkel solvent acrylic adhesive. Transparent, weatherproof, peels residue-free when you're ready for a change Installs without headache: PET release liner holds tension-flat. Conforms to edges, mirrors, and recessed panels without lifting Paint-safe removal: adhesive system leaves your factory finish completely untouched First glance: it's pink, but not the pink you expect. Cashmere Rose has a softness to it, like a blush that catches the sun without shouting. In bright light, the rose tone warms up with a gentle glow. Overcast conditions pull it slightly cooler, but the color stays pink. It never turns grey or muddy. Stand it next to a typical pink wrap and the difference is immediate. Cashmere Rose looks like it belongs on a luxury car, not a promotional vehicle.

OEM Match

Closest to Bentley Cherry Blossom Pink Same saturation as Porsche Frozen Berry Metallic Warmer than Cadillac Mary Kay Pink Love those factory pinks on a Bentley, Porsche, or Cadillac? Now put that same color energy on your GT-R, Supra, C8, or Model 3.

Film Construction

• Film Type: Color PPF aliphatic TPU paint protection film
• Film Thickness: 180-220 um
• Release Liner: Air-release liner for dry installation
• Adhesive: Low-tack acrylic pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +90°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Up to 5 years depending on film line, climate, exposure, and maintenance.

• Application temperature: +18°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: painted panels, bumpers, mirrors, and moderate curves
• Post-heat: 80-90°C where required
• Cure: 24-48 hrs after installation
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.