White Satin (CK903) is a luxurious pearl white with a smooth satin sheen and a subtle starlight effect. Unlike flat satin whites, it contains fine pearl pigments that gently sparkle under direct light while maintaining a soft, elegant appearance.

In shade and overcast conditions, the finish appears as a clean arctic white with creamy undertones and a velvety texture. Under sunlight, the pearl particles become more visible, creating delicate silver and champagne reflections that move across the bodywork.

Key Attributes

• Genuine pearl base, not a flat white: fine pearl pigment gives a quiet, starlight-style sparkle rather than heavy metallic flake.
• True cool-white undertone: reads arctic in shade and gently warms under direct sun, without drifting cream or blue.
• Soft satin sheen: diffuses reflections so the surface looks smooth and factory-finished rather than mirror-glossy.
• Bubble-free installation: calendered vinyl film with air-release channels for a clean lay-down.
• Weatherproof adhesion: Henkel solvent-based acrylic adhesive holds up outdoors and removes without residue.
• Shape-friendly film: conforms cleanly to smooth and moderately curved panels.

OEM Match

• Closest to Lexus Eminent White Pearl in depth and glow.
• Same fine sparkle as Mazda Snowflake White Pearl Mica.
• Cooler and crisper than Genesis Uyuni White.
• Less metallic-flake than BMW Mineral White Metallic.
• Softer sheen than Porsche Carrara White Metallic.

Pearl whites like these are usually locked to a manufacturer's top trims. TeckWrap's Satin White brings that same soft-sparkle finish to any car in the driveway, whether it's a heavily built show car or a daily driver.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Satin finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.