Plenty of matte whites turn grey, blue, or chalky once they are on the car. TeckWrap Matte White stays a clean, neutral white with a soft surface and no glare. It is the quieter alternative to a bright gloss white, which reflects everything around it.

Key Attributes

Clean neutral white: a smooth white that holds its tone without going grey, blue, or yellow. No glare: the matte finish scatters light for an even, soft look, without the hot reflections you get on gloss white. Henkel adhesive: solvent acrylic adhesive that stays clear and holds up to sun and regular washing. Clean removal: lifts off with heat and leaves the factory paint underneath unharmed. Wraps edges and curves: air-release channels and a stretchable film follow edges and moderate recesses for an even finish. Matte White is bright without being loud. Gloss white reflects its surroundings and glares in the sun. This film softens that into an even, low-sheen surface that stays calm in any light. In full sun it looks crisp and clean. Under cloud it settles into a soft white. Pick it when you want a clean look without the shine.

OEM Match

In the family of BMW Frozen Brilliant White. Cleaner and more neutral than Mercedes designo magno cashmere white. A matte alternative to the standard gloss whites on most showroom floors. Comparable in mood to Lamborghini Bianco Matte. Frozen and magno matte whites are reserved for premium factory options. TeckWrap Matte White puts that soft finish on any car, and it comes off cleanly when you want a change.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Matte finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.