A grey finish can feel distant when all the warmth disappears. TeckWrap's High Gloss Vintage Grey brings back the soft champagne tone that once defined European luxury paint.

Key Attributes

• Champagne over chrome: warm light silver-grey with a soft beige undertone, built to avoid the cold, digital look of newer silvers.
• Heritage-inspired gloss: polymeric multilayered hybrid film gives the finish creamy reflections and paint-like depth instead of a harsh metallic shine.
• Bubble-free finish: air release channels clear trapped air during application, so panels sit flat with no bubbling.
• Heat-responsive film: wraps around mirrors, curves, and moderate recessed panels with controlled heat.
• Grips through weather: Henkel solvent acrylic adhesive stays transparent and holds through changing weather.
• Comes off clean: adhesive lifts without residue, leaving the factory paint exactly as it was

Vintage Grey never settles on a single shade. Early morning light brings out a soft champagne glow, while midday reflections reveal a clean light silver. Late afternoon adds a gentle titanium character across the bodywork. Instead of flashing bright white like contemporary silvers, the reflections stay creamy, giving broad panels a smooth, almost hand-finished appearance. The warmth isn't obvious from across a parking lot. It reveals itself gradually as the light moves.

OEM Match

• Closest to Mercedes Mojave Silver.
• Softer than Porsche GT Silver.
• Same saturation as Range Rover Silicon Silver.
• Lighter than Lexus Sonic Titanium.
• Warmer than BMW Cashmere Silver.

Mercedes, Porsche, and Range Rover each gave warm silver grey their own interpretation. Vintage Grey carries that same heritage onto the car you drive today.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and High Glossy finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.