TeckWrap Vibrant Nickel is perfect for the sophisticated. It has a low-profile look with a sense of luxury. Don’t miss this color if you want something simple yet classic. Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it's stretchable enough to quickly wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint.

Specifications

Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). Film Thickness: 0.14 mm Backing Liner Thickness: 0.14 mm Release Liner Thickness: 0.03 mm Total Thickness (with liner): 0.31 mm Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Type of Film: Premium-grade polymeric multilayered hybrid vinyl film with air-release channels Width & Length: Standard roll size - 1.52m 18m (59.8" 708.6", 4.98ft 59ft, 1.66yd 19.6yd) Adhesive & Release Liner Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Storage Storing Period (Shelf Life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original

package

, away from direct sunlight, clean and dry place Performance

Durability/Warranty

Datasheet (Click the link)

Application

from +17°C to +18°C, usage from -45°C to +45°C Release Force (N/25mm): Standart: 0.10-0.30, Result: 0.17 (23℃,54%H) Initial Tack (g/25mm): Testing method: GB31125-2014, Standart 800-1500, Result: 840 (23℃,54%H) 180° Peel Strength (N/25mm): Testing Method: GB/T2792-1998, Standart ≥6.8, Result: 8.7 (23℃,54%H) Adhesion Strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Recommended

Application

Tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application

Method: Standard methods for calendered films. No overstretching. Post heating Post-heating Temperature: 90°C Cure Time: 24 hours above ten °C Aftercare: PH neutral. Avoid wax or solvents Directional: Yes Tools : soft squeegees with buffers The protective cap should be peeled off before installation.

Important note

The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the

application

or a day in and out use. The warranty does not cover the scratching of the film.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Directional film: align panels in the same direction during installation.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.