Red wraps usually struggle with orange-tinted highlights or muddy shadows, depending on the viewing angle. TeckWrap Ultra Gloss Velvet Red does not. It gives you rich crimson depth with a warm metallic finish that stays saturated through every lighting change.

Key Attributes

• Rich candy-red depth: deep crimson tone and wine-red metallic shimmer keep the finish lively from sunrise to sunset.
• Smooth gloss surface: presents candy red with ruby in the highlights and holds black cherry warmth in the shade.
• Paint-friendly Adhesive: Henkel polyacrylate transparent adhesive delivers a weatherproof bond. It removes cleanly without leaving glue marks behind.
• Material that responds to heat: softens under heat to glide tightly over curves, bumpers, mirrors, and deep contour lines.
• Harsh weather Resistance: holds its color and gloss through sun exposure, rain, and daily use.

TeckWrap Velvet Red shifts from moody black-cherry in the shade to a vibrant, glowing ruby under direct sunlight. In softer light, the color settles into a deeper wine-red tone with a smooth, polished character. It maintains its depth and does not go flat or dull.

OEM Match

• Closest to BMW Individual Aventurin Red Metallic
• Same depth as Mazda Soul Red Crystal
• Warmer than Cadillac Red Horizon Tintcoat
• Sportier than Lexus Matador Red Mica
• More vivid than Porsche Guards Red

Love the richness of BMW Individual Aventurin Red or Mazda Soul Red Crystal? Velvet Red brings that same color character to the vehicle already sitting in your garage.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and High Glossy finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.