TeckWrap Vanilla Cream is a soft, warm off-white with a super-matte finish. It avoids the cold look of a plain matte white and the glare of a gloss white, landing on a calm, slightly vintage cream that stays easy on the eye in any light.

Key Attributes

• Warm, balanced cream: a soft off-white with just enough warmth to read as cream, without tipping into yellow or grey.
• Super-matte surface: a very low-sheen finish that keeps the color soft and free of glare in any light.
• Henkel adhesive: solvent acrylic adhesive that stays clear and holds up to sun and regular washing.
• Clean removal: comes off with heat and leaves the factory paint underneath unharmed.
• Wraps edges and curves: air-release channels and a stretchable film follow edges and moderate recesses for an even finish.

Vanilla Cream is a warm, soft color that shifts a little with the light. In full sun it looks light and clean, close to a pale cream. In shade it warms up and reads richer, almost like aged ivory. The super-matte surface keeps it from ever looking glossy or plasticky, which is what gives it that vintage, soft-touch feel. It looks at home on a classic shape and just as good on a modern EV like a Tesla or a Porsche SUV.

OEM Match

• In the spirit of classic Porsche Ivory.
• Warmer than a plain matte white.
• Close in mood to Rolls-Royce English White and vintage magnolia creams.
• A soft, retro alternative to bright modern whites.

Cream and ivory tones like this used to be reserved for classic and luxury cars. TeckWrap Vanilla Cream brings that warm, vintage look to any vehicle, and it comes off cleanly when you want to change it.

Specifications

• Thickness of the film: 0.13 mm
• Thickness of film with release liner: 0.14 mm
• Total Film Thickness: 0.27 mm
• Type of film: Premium-grade polymeric hybrid film with air-release channels
• Series: 180 series

Adhesive & Liner:

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
• Storing Period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
• Durability / Warranty: Datasheet (Click the link)
• Dimensional Stability: Shrinkage less than 0.20%
• Plastification: 25%-32%
• Breaking Strength: 30.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• 180º Peel Strength (to steel panel): 9 N/10mm (Average) Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure: Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 / Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/(m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48h

Install tips:

Temperature: from +18°С to 20°С, usage from -30°С to +30°С Tools: Standard squeegee with a soft buffer Conformability: smooth and medium curved surface Directional: yes Overlap width: 3-4mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

The protective cap should be peeled off before installation.:

Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Matte finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.