An emerald green that warms in the sun the way a real gemstone does, now in a Color PPF film with stone-chip armor underneath.

Deep gloss emerald with a warm metallic undertone, the kind of green that pulls gold light at the right angle and stays jewel-saturated everywhere else.

For your vehicle

• Gloss color paint protection film in a warm-toned emerald green with metallic depth
• Engineered to absorb stone chips, road debris, scratches, and chemical exposure that thin out factory paint
• Top coat heals minor scratches and swirl marks on its own under heat or sun, no compounding or polishing
• Hydrophobic and chemical-resistant from the surface down, water beads off and the ceramic step is no longer required
• Fully opaque pigmented green over a self-healing PPF base, a full color change with the factory paint protected underneath
• Sits in the territory of Bentley Verdant Green Metallic and Range Rover Tonga Green, with the armor built into the film
• Backed by a 5-year manufacturer warranty

A warm metallic emerald has two homes in the TeckWrap range. A gloss vinyl wrap is the right call for buyers focused on the color itself, with the freedom to refresh later and a lower commitment up front. Warm Emerald is the Color PPF call, the same emerald with a stone-chip armor layer running underneath the color. Two ways to wear the gemstone, picked by the job that matters more to you.

It belongs on cars that earn a warm green well, grand tourers, luxury SUVs, executive sedans, and the modified flagships where color and protection both have to read luxury.

For installers

• Aliphatic TPU base for impact resistance and long-term dimensional stability
• Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
• 344 μm total film thickness, 194 μm application layer, true PPF-class stone-chip defense
• 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
• 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
• Low-tack acrylic PSA with full repositioning capability during install
• Ultra micro-grooved PET liner with air-release channels, dry-install system
• Faster install than wet-application PPF, with cleaner first-pass results
• 5-year manufacturer warranty, fully traceable for installer warranty claims

Film Construction

• Film Type: Color PPF aliphatic TPU paint protection film
• Film Thickness: 180-220 um
• Release Liner: Air-release liner for dry installation
• Adhesive: Low-tack acrylic pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +90°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Up to 5 years depending on film line, climate, exposure, and maintenance.

• Application temperature: +18°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: painted panels, bumpers, mirrors, and moderate curves
• Post-heat: 80-90°C where required
• Cure: 24-48 hrs after installation
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.