Bright pinks usually go one of two ways, pastel and forgettable, or neon and cheap-looking. TeckWrap High Gloss Sorbet Pink keeps its rich raspberry-magenta tone alive with a wet gloss that grows deeper as the light changes.

Key Attributes

• Candy-coated depth: vibrant raspberry-magenta with fine metallic pigment creates a glossy finish that stays rich instead of looking synthetic.
• Structured shine: polymeric multilayered hybrid film carries the metallic pigment through the surface, so the color holds dimension instead of sitting flat like a print.
• Weatherproof hold: Henkel solvent acrylic adhesive stays transparent through rain and heat, then peels off without leaving residue.
• Air-release technology: built-in air-release channels guide trapped air away for cleaner positioning across large panels.
• Contour flexibility: wraps confidently around mirrors, bumpers, curves, and recessed sections with controlled heat.
• Factory paint friendly: removable adhesive lifts away cleanly and helps preserve the original clear coat.

Sorbet Pink changes character throughout the day. Direct sun brings out a juicy raspberry tone, evening light leans toward electric magenta, and wet pavement gives it a richer, almost neon glow that reflects like fresh enamel. It carries the look of pop-art colors while keeping enough depth to suit modern builds, retro icons, and attention-grabbing project cars alike.

OEM Match

• Closest to Porsche Ruby Star Neo (718 / 911).
• Brighter than Fiat 500 Rosa.
• Deeper than Vespa's pastel pink scooter finishes.

Sorbet Pink isn't meant to disappear into traffic. It gives bold projects a color that stays memorable long after the drive is over.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.