Ocean Jade (VCH405-M) Most matte greens either go flat in the shade or drift into olive territory. Ocean Jade does neither. Its matte chrome finish keeps a cool metallic glow across changing light, while its blue-green base shifts between ocean depth and emerald richness.

Key Attributes

● Green with real dimension: color that holds depth in both sunlight and overcast conditions ● Matte chrome character: metallic reflection creates movement without the glare of a gloss finish ● Built for clean installs: air-release channels keep

application

smooth ● Conforms around complex shapes: wraps mirrors, bumpers, and moderate recessed areas with ease ● Clean chemistry: weatherproof adhesive removes residue-free when it's time for a change Color Story Ocean Jade sits between deep emerald green and blue-tinted sea glass. In the shade, it takes on a darker ocean-green appearance with a cool metallic undertone. Under direct sunlight, the matte chrome finish reveals brighter jade highlights that travel across body lines and contours. Many matte greens lean earthy or military. Ocean Jade stays cleaner and cooler. The blue influence gives it a modern performance feel while the green remains strong enough to stand apart from typical gray, silver, and blue builds.

OEM Match

● Closest to BMW Individual Atlantis Metallic, but greener ● Shares the same blue-green balance as Porsche Paint-to-Sample Mint Green ● Same jewel-like color character as Toyota Dark Emerald Green Pearl ● Cooler-toned than Aston Martin Q Fiji Blue Love rare factory greens from BMW, Porsche, Toyota, and Aston Martin? Ocean Jade brings that same special-order color energy to any vehicle.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Film finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.