Sakura is the specific pale pink of cherry blossoms against morning light, and we put that exact wash into a Color PPF film. The blush sits on a self-healing paint protection layer rather than just a coating of color.

A pearl white with a delicate pink wash underneath, the kind of finish that shifts between cool ivory in shade and warm blush in direct light.

Key Attributes

• Pearl color paint protection film, a soft white with a cherry-blossom pink undertone
• True PPF-class protection against rock chips, road debris, scratches, and chemical exposure
• Top coat heals minor scratches and swirl marks on its own under heat or sunlight, keeping the pearl uniform
• Hydrophobic and chemical-resistant from the surface down, water sheds clean and the ceramic step is no longer needed
• Fully opaque pigmented pearl over a self-healing PPF base, real color change and real paint protection in one film
• Backed by a 5-year manufacturer warranty

A pearl white with a pink wash is a deliberate choice, not a default. A pearl vinyl wrap is the right pick when the buyer wants the look with a lighter commitment and the freedom to refresh into a different finish later. Sakura Pearl is the Color PPF pick, the same delicate pearl-blush sitting on a stone-chip armor layer underneath the color. Two ways to wear the cherry-blossom finish, picked by the job that matters more.

It belongs on builds where elegance reads quietly, design-forward EVs, refined coupes, smaller luxury cars, and the kind of build whose owner chose this color on purpose rather than by default.

Film Properties

• Aliphatic TPU base for impact resistance and long-term dimensional stability
• Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
• 344 μm total film thickness, 194 μm application layer, true PPF-class stone-chip defense
• 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
• 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
• Low-tack acrylic PSA with full repositioning capability during install
• Ultra micro-grooved PET liner with air-release channels, dry-install system
• Faster install than wet-application PPF, with cleaner first-pass results
• 5-year manufacturer warranty, fully traceable for installer warranty claims

Film Construction

• Film Type: Color PPF aliphatic TPU paint protection film
• Film Thickness: 180-220 um
• Release Liner: Air-release liner for dry installation
• Adhesive: Low-tack acrylic pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +90°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Up to 5 years depending on film line, climate, exposure, and maintenance.

• Application temperature: +18°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: painted panels, bumpers, mirrors, and moderate curves
• Post-heat: 80-90°C where required
• Cure: 24-48 hrs after installation
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.