Deep purple wraps often swing too blue or lose their richness once the light changes. TeckWrap Gloss Metallic Royal Purple keeps its warm royal-violet tone intact, revealing layered metallic highlights without drifting into electric blue.

Key Attributes

• Royal-violet metallic finish: rich plum and berry undertones blend with fine metallic flake, giving the color depth that changes with every angle.
• Gloss that follows the light: polymeric multilayered hybrid film distributes metallic pigment evenly, keeping reflections sharp across large panels and tight body lines.
• Air has an exit: built-in air-release channels guide trapped air away during installation, helping the film settle into a smooth, even finish.
• Heat-conformable film: wraps around mirrors and moderate recessed panels while maintaining a consistent metallic finish.
• Weather-ready hold: Henkel solvent acrylic adhesive stays transparent through changing seasons and resists moisture.
• Residue-free removal: the adhesive lifts cleanly, helping preserve the factory finish underneath.

Royal Purple reveals more than one side of its personality. In the shade, it settles into a deep violet with rich plum undertones that give the surface a calm, refined appearance. As sunlight reaches the metallic flake, bright amethyst and berry highlights spread across every contour, adding movement without overpowering the base color. Compared with cooler blue-based purples, Royal Purple stays warmer, richer, and closer to a limited-production factory metallic.

OEM Match

• Closest to Fiat 500 Viola Pastello.
• Softer than Porsche Purple Sage.
• Lighter than Porsche Viola Metallic.

Skip the waiting list for a rare factory paint code. Royal Purple brings the same lavender-inspired finish to your Supra, Corvette C8, Mustang, Model 3, or any custom build.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Directional film: align panels in the same direction during installation.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.