Bright blues often drift toward sky blue, while dark blues can look almost black. TeckWrap Ultra Gloss Royal Blue lands right there. The rich cobalt-blue base stays full and saturated while the ultra-gloss finish adds bright electric-blue reflections across the surface.

Key Attributes

• Color that stays alive: cobalt-blue metallic base with an indigo undertone holds its character in low light instead of fading into dark navy.
• Vivid motorsport character: ultra-gloss finish creates sharp reflections that roll across the body panels without haze as the car moves.
• Strong Adhesion, clean removal: Henkel solvent acrylic adhesive, transparent and weatherproof. Peels off without leaving residue.
• Heat-conformable film: wraps smoothly over mirrors, bumpers, and recessed body lines for a tight fit.
• Consistent application: premium PET release liner protects the adhesive before installation, helping the film lay down cleanly across large panels

TeckWrap Ultra-Gloss Royal Blue sits on the more energetic side of the spectrum. In shade, the cobalt base deepens with a slight indigo pull. In direct light, it snaps into vivid electric blue with a liquid-aluminum reflection that sweeps across the panel. It carries a clean motorsport look, making it a natural fit for sports cars, tuner builds, and modern performance vehicles.

OEM Match

• Closest to BMW Individual San Marino Blue Metallic.
• Same cobalt-blue energy as Lexus Structural Blue.
• Same blue intensity as Lexus Ultrasonic Blue Mica.
• Brighter than Porsche Gentian Blue Metallic

Not every blue needs a performance badge behind it. TeckWrap Royal Blue brings the same rich color presence to family SUVs, executive sedans, electric vehicles, and sports cars alike.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.