Rouge Red is a clean, bright lacquer red that reads racing red, supercar presentation red, motorsport paddock red. In motion the gloss and saturation stay stable without drifting orange or pink, the reflections stretch sharply across the surface, and the red holds pure under changing light for a fresh factory-painted look. Where most bright reds go plastic, oversaturated, or toy-like in motion, this one keeps a liquid paint appearance with clean reflections and a very OEM sports-car character.

This is the pure glossy motorsport red of the lineup. Sangria Red is the luxurious metallic wine red and Velour Red is the darker satin industrial oxide; Rouge Red is the fresh Ferrari-showroom one, polished Italian lacquer with track-day energy and classic racing heritage. Universally recognizable and motorsport-oriented. It suits performance and sports-car builds: a Ferrari 488, a Toyota Supra or GR86, a Honda Civic Type R or Integra Type S, a Chevrolet Corvette C8 or Camaro, a Nissan GT-R or 370Z, a Porsche 911 or Cayman, a BMW M2 or M4, an Alfa Romeo Giulia Quadrifoglio, or a Mazda MX-5 Miata.

On OEM references it tracks Ferrari Rosso Corsa, Honda Championship Red, Chevrolet Corvette Torch Red, Toyota Supra Renaissance Red, and a brighter Mazda Soul Red.

Key attributes:

• Super Gloss HD vinyl wrap, pure racing red with sharp reflections and liquid paint depth
• Premium polymeric hybrid film with air-release channels
• Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
• High-grade PET release liner for smooth finish and adhesive protection
• Conformable to curves, mirrors, and recessed panels
• Safe removable adhesive, protects factory paint underneath

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and High Glossy finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.