Soft pink finishes often fade into the background or drift too close to bubblegum. TeckWrap Gloss Metallic Sakura Pink keeps its color clean and balanced, adding a gentle metallic glow that feels fresh and polished from sunrise to sunset.

Key Attributes

• Blossom-inspired color: Delicate sakura pink with fine metallic shimmer creates a clean gloss finish that stays refined instead of sugary.
• Lasting gloss clarity: Renolit polymeric hybrid film distributes metallic pigment evenly, keeping reflections smooth across every panel.
• Bubble-free application: Air-release channels direct trapped air away during installation, helping the film settle into a clean, even surface.
• Weather-ready adhesion: Henkel solvent acrylic adhesive stays transparent through changing weather and removes cleanly without leaving residue.
• Made for curves: Wraps around mirrors, bumpers, door handles, and moderate recessed panels while keeping the gloss even across every surface.

Sakura Pink sits closer to a blush than a bubblegum pink. Under overcast light it reads muted and warm, almost dusty. Direct sun brings out a faint glow rather than a hard shine. Most pastel wraps either fade toward gray in shade or turn artificial-looking in full sun. Sakura Pink holds one consistent tone across both, closer to a cosmetic blush finish than a typical vinyl pink.

OEM Match

• Closest to Nissan Sakura Pink.
• Softer than Porsche Frozen Berry Metallic.
• Lighter than BMW Rose Quartz Metallic.
• Cleaner than Fiat Rosa Primavera

If soft factory pinks have always caught your eye, Sakura Pink brings that same fresh tone to a full-size SUV, a sedan, or a simple hood and roof accent.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Directional film: align panels in the same direction during installation.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.