Most satin greens lose their color once the light fades. They drift toward black and leave very little of the green behind. Pine Green doesn't. Its satin metallic finish keeps a cool pine tone alive from bright daylight to overcast skies, adding depth without the sharp reflections of gloss.

Key Attributes

• Metallic depth: Fine metallic flake adds soft dimension while the satin finish controls glare, helping the green stay rich in changing light.
• Engineered color: Polymeric multilayered hybrid film keeps the pigment even and consistent, so the finish stays clean and true.
• Clean chemistry: Henkel solvent acrylic adhesive forms a secure bond, stays weatherproof, and removes cleanly without leaving residue.
• Flawless application: Premium PET release liner keeps the film tension-flat for a smooth satin finish with fewer installation marks.
• Heat-conformable: Wraps around mirrors, edges, curves, and moderate recessed panels with confidence.
• Paint-safe: Removable adhesive helps protect your factory finish.

Pine Green blends the richness of a deep forest green with a cool blue-green undertone. The satin surface softens reflections while the metallic grain adds quiet movement instead of high sparkle. In direct sunlight, the metallic flake brightens the finish with a subtle emerald glow. Under cloudy skies or in the shade, the color settles into a darker pine tone without losing its identity. Compared with many satin greens that appear dull in low light, Pine Green keeps its depth and character throughout the day.

OEM Match

• Closest to Porsche Brewster Green
• More muted than BMW Isle of Man Green
• Darker than Audi District Green Metallic

Love the timeless character of these factory greens? Bring that same refined color to your Mustang, M4, Supra, Model 3, or any vehicle in your garage.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Satin finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Directional film: align panels in the same direction during installation.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.