TeckWrap
Paradise Green (SMT12) Vinyl Wrap 1

Description

Specifications

Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface). The thickness of the film: 0.12mm The thickness of film with release liner: 0.28mm Type of film : Pressure-sensitive high-grade polymeric vinyl film with air-release channels Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1, 9 printed, double-sided PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001) Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original

package

, away from direct sunlight, in a clean and dry place

Durability/Warranty

Datasheet (Click the link) This color is less durable to UV exposure (10-12 months) and needs extra protection with a ceramic coating. Post heating: 65 Celcius Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02) Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02) Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02) Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production)

Package

Roll width 152 cm, length 18 m, weight 13 kg

Install tips

Temperature: from +17°-18°С, usage from -45°С to +45°С Tools : Standard squeegee with soft (wet) buffer Conformability : smooth and medium curved surface Directiona l: yes Overlap width : 3-4mm

Important note

The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the

application

or a day in and out use. The warranty does not cover the scratching of the film.

Features

Film Construction

  • Film Type: Premium polymeric hybrid vinyl film with air-release channels and Film finish
  • Film Thickness: 0.11 mm
  • Release Liner: silicone-coated release liner
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -30°C to +45°C
  • Release force: 0.18 N/25mm (standard 0.10-0.30)
  • Initial tack: 1015 g/25mm (standard 800-1500)
  • Peel strength (180°): 8.1 N/25mm (standard >=4.9)
  • Adhesion strength: 70 (standard >=60, no shifting)
  • Aging tested: high and low temperature release without adhesive residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

  • Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 90-100°C
  • Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
  • Overlap: 3-4 mm
  • Non-directional film.
  • Clean, degrease, and dry the surface before installation.
  • Remove the protective cap or PET protective layer before applying heat.
  • Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

Disclaimer

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.

Recommended Products