TeckWrap Lizard Grey is a grey with a subtle green cast, finished in super matte. It is not a flat, neutral grey; the soft green in it gives the color more character while still reading as a grey.

Key Attributes

• Grey with a green cast: a muted grey that leans gently green, closer to sage than to a plain neutral grey.
• Low-sheen flat finish: a full matte surface with no shine, which keeps the green quiet and the whole look soft.
• Solvent acrylic bond: Henkel solvent acrylic adhesive, clear and weather resistant, that grips well and stays put once it is down.
• Lifts off later: releases with heat when you are ready for a change, with no residue and no harm to the paint.
• Stretches to fit: conforms around curves and edges, with up to about 30% stretch under heat to pull over mirrors and recessed panels.

This is the part that makes Lizard Grey worth a look. Depending on the light, it can read as a straight grey or show its green side. In flat or overcast light it sits closer to a neutral grey, and in sun, or next to greenery, the sage cast comes forward. Because the finish is fully matte, none of this turns into shine or reflection, so the color stays soft and a little understated either way. It is a grey for people who find plain grey boring.

OEM Match

• Closest to Toyota Lunar Rock, the grey-green seen on the 4Runner and Tacoma
• Greener than Audi Nardo Grey
• Darker and greener than Toyota Cement
• Greyer than a true olive or military green

Grey is a safe color, and the green cast is what keeps Lizard Grey from blending in with every other grey car. It looks especially good on trucks and SUVs, the 4Runner included, and it comes off cleanly later if you want a change.

Specifications

Material & Film:

• Type of Film: Medium-grade polymeric calendared film with air-release channels
• Film Thickness: 0.13 mm
• Thickness with Release Liner: 0.14 mm
• Total Film Thickness: 0.27 mm
• Dimensional Stability: Shrinkage
• Plastification: 25–32%
• Breaking Strength: 30.7 N/10mm (Average)
• 180º Peel Strength (to steel panel): 9 N/10mm (Average)

Adhesive & Liner:

• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000cps, thickness 12 μm dry
• Release Liner: Felix Schoeller / 20-104-20-1,9 printed, double-sided PE coated Kraft, one side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)

Storage & Warranty:

• Storing Period: 3 years if stored at +10°С to +20°С, 50% relative humidity, in original packaging, away from direct sunlight
• Durability/Warranty: Datasheet

UV & Weather Resistance:

• Light Ageing in UV Exposure: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Result: 4–5, exposure duration 48h

Installation Tips

• Application Temperature: +18°С to +20°С
• Usage Temperature: -30°С to +30°С
• Tools: Standard squeegee with a soft buffer
• Conformability: Smooth and medium curved surfaces
• Directional: Yes
• Overlap Width: 3–4 mm
• Protective Cap: Remove before installation

Packaging

• Roll Width: 152 cm
• Roll Length: 18 m
• Weight: 13 kg

Important Notes

• Images, colors, and finishes on screen are approximate. Always check a physical color swatch for accuracy.
• Use rolls from the same production LOT number to avoid batch-to-batch color variation.
• The film may scratch during application or daily use; scratches are not covered under warranty:.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Matte finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.