Many neon greens lose their zest once they leave the showroom lights, disappearing into olive. TeckWrap's High Gloss Gecko Green keeps its electric yellow-green bite, holding its saturation throughout the day.

Key Attributes

• Built to be noticed: fluorescent yellow-green with candy-like gloss that refuses to blend into traffic.
• Gloss is the whole trick: polymeric multilayered hybrid film gives the color a liquid finish that keeps its bright, lit-from-within character.
• Air finds the exit: air-release channels help trapped air escape as you apply the film, making large panels easier to smooth.
• Clear grip through every season: transparent Henkel solvent acrylic adhesive stays weatherproof and removes without residue.
• Follows every contour: heat lets the film settle around mirrors, bumpers, edges, and moderate recessed panels with confidence.

Gecko Green is not your traditional green. It lives somewhere between acid lime, fluorescent yellow, and racing green, with a glossy surface that makes the color look switched on. Bright sunlight turns it into an almost radioactive lime, overcast skies reveal a deeper muscle-car green, and night lighting gives it a candy-coated glow. It has candy-like depth behind the color instead of a flat coat of bright.

OEM Match

• Closest to Dodge Sublime Green (Challenger / Charger).
• Same fluorescent attitude as Dodge Lime Light (Demon / Challenger R/T).
• Warmer than Lamborghini Verde Shock (Huracán).
• Brighter than Audi's RS-series acid green.
• Same intensity as Kawasaki's signature green.

Dodge made this color famous, Lamborghini pushed it further, and Gecko Green brings that same high-voltage energy to the car in your garage.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.