Many purple wraps lose their depth and either turn loud violet or muddy grey-brown. TeckWrap's Dusky Grape settles into a dusty lavender-grey with a soft plum undertone, staying clean, balanced, and full of depth.

Key Attributes

• Smoky lavender tone: dusty lavender-grey with soft plum undertones creates a finish that looks composed instead of loud.
• Creamy reflection structure: polymeric multilayered hybrid film with fine metallic pigment softens the shine, creating creamy reflections.
• Air-guided installation: built-in air-release channels move trapped air away, allowing large panels to lie flat.
• All-weather adhesion: Henkel solvent acrylic adhesive stays transparent and holds firmly through changing weather conditions.
• Curve-ready film: wraps around mirrors, edges, and moderate recessed panels with controlled heat.
• Residue-free removal: the adhesive lifts away clean, leaving the factory finish exactly as it was.

Dusky Grape rarely looks as purple as its name suggests, and that is exactly what gives it its character. In daylight, the grey undertone steps forward, turning the plum into a soft smoky mauve. As reflections move across the bodywork, the finish shifts toward a creamy lavender-grey rather than deep violet. This gives the color a quiet, tailored appearance. It sits comfortably between classic grey and muted purple, adding just enough color to separate the car from ordinary neutral finishes.

OEM Match

• Closest to Porsche's custom violet-tinted grey.
• Softer than Aston Martin's satin lavender.
• More muted than Rolls-Royce's bespoke dusty-violet builds.

Many muted violet tones are reserved for custom paint programs or limited commissions. Dusky Grape turns that into something you can actually order for the car in your driveway.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.