Most dark greys read as either industrial gunmetal or a flat, lifeless charcoal. Dark Platinum does neither. It holds a refined, deep grey with a smooth satin sheen, closer to polished platinum than shop-floor steel.

Key Attributes

• Refined deep grey: a precious-metal quality rather than an industrial or flat tone
• Smooth satin sheen: enough sheen to read as considered and finished, without the flash of a bright metallic
• Engineered finish: high-grade polymeric calendared vinyl film with air-release channels for a smooth, even satin
• Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and weather-resistant, removes residue-free
• Deep conformability: stretches over flat panels, moderate curves, and deep recesses with inlays
• Paint-safe: removable adhesive protects the factory finish underneath

Dark Platinum sits in the quiet, refined end of TeckWrap's grey lineup. It doesn't chase the industrial edge of a gunmetal or the graphite haze of a smoky grey, and it isn't as flat as a true matte finish either. Instead it holds a deep, considered grey with just enough satin sheen to look finished and deliberate in any light, precious metal rather than raw metal. It's built for owners who want a grey that reads expensive and calm rather than aggressive or industrial.

OEM Match

• Closest to Porsche Agate Grey Metallic
• Same refined, precious-metal quality as Volvo's Osmium Grey
• Warmer and more finished than a flat industrial gunmetal
• Quieter than a bright performance-silver metallic

That refined platinum-grey finish that shows up on Porsche and Volvo's quieter special colors now fits a Camry, Accord, or Grand Cherokee just as easily as a Cayenne or XC90

Specifications

• Material: Conformable and reliable multilayered polymeric material with stable color pigments.
• Suitable For: Full car wrapping (or any smooth or curved surface)

Film Details:

• Film Thickness: 121 μm
• Thickness with Release Liner: 0.14 mm
• Total Film Thickness: 0.29 mm
• Type of Film: High-grade polymeric calendared vinyl film with air-release channels

Adhesive & Release Liner:

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft (ISO 9001, ISO 140001, OHSAS 18001)

Storage & Warranty:

• Storing Period: 3 years if stored at +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
• Durability/Warranty: Datasheet

Performance Testing:

• Release Force (N/25mm): Standard 0.04–0.12, Result 0.1 (23°C, 54% RH)
• Initial Tack (g/25mm): Standard 800–1500, Result 1254 (23°C, 54% RH)
• 180° Peel Strength (N/25mm): Standard ≥7.85, Result 11.17 (23°C, 54% RH)
• Adhesion Strength: Standard ≥60, Result 70 (No shifting)

Aging Tests:

• High Temperature (65°C, 7 days): No adhesive residue
• Low Temperature (-65°C, 10 days): No adhesive residue

Installation Tips:

• Application Temperature: +17°C–+18°C
• Usage Temperature Range: -45°C to +45°C
• Tools Required: Soft squeegee with buffer
• Conformability: Flat and moderate curves; suitable for deep recesses with inlays
• Directional: Yes
• Overlap Width: 4–5 mm
• Post-Heating Temperature: 100°C

Package:

• Roll Width: 152 cm
• Roll Length: 18 m

Important Note

• Screen images, colors, and finishes are approximate. Always check the physical color swatch for accuracy.
• Use rolls from the same production LOT number to avoid slight batch-to-batch color variations.
• The film may scratch during application or daily use. Scratching is not covered by the warranty:.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Satin finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.