Tasteful as wine, TeckWrap Concord Grape is an excellent choice to spice up your car. Wrap to feel the difference now. Stop dreaming about a head-turning finish and start driving one.

Key Attributes

• Color character: Concord Grape (VCH403-S) brings a Satin finish that updates the vehicle without permanent paintwork.
• Liquid surface effect: polymeric hybrid film construction supports a smooth, consistent finish.
• Trusted adhesive system: weather-resistant acrylic adhesive supports installation and clean removal.
• Installation support: air-release channels help align large panels and manage bubbles.
• Conforms under heat: suited for mirrors, bumpers, grilles, and moderate curves when installed correctly.

Concord Grape (VCH403-S) Vinyl Wrap is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Comparable to custom OEM purple, lavender, and rubystar-style paint families.
• Lighting can change the perceived tone, so physical swatch review is recommended.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Satin finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.