Metallic blues force a choice between brightness and depth. TeckWrap Ultra Gloss Blue Gem does both. It combines cobalt tone with sapphire and electric blue and presents a transition from rich metallic depth to a jewel-like shimmer as the light changes.

Key Attributes

• Blue that stays vibrant: Saturated blue with cobalt metallic finish and sapphire highlights. The color remains active from dawn light to evening shade.
• Light-reactive gloss: Fine metallic flake delivers sharp gloss that shifts color intensity across body lines.
• Adhesive that performs: Henkel solvent acrylic adhesive holds securely and stays transparent and weatherproof.
• Paint-safe removal: Pressure-sensitive adhesive removes without residue, leaving your factory finish untouched.
• Ready for complex panels: Flexible film conforms around curves and repositions accurately.

TeckWrap Blue Gem carries the richness of polished sapphire with the brightness of cobalt metallic paint. It reads as deep royal in shade, then changes to vivid electric with every reflection. Even in softer light, the sapphire undertone holds. Unlike generic blues that lose their energy fast, Blue Gem retains its depth and intensity, and stays sharp from every angle.

OEM Match

• Closest to Ferrari Blu Elettrico.
• Same tone as BMW Individual San Marino Blue.
• More saturated than Audi Sepang Blue Pearl.
• Same depth but more electric than Honda Still Night Pearl.
• Brighter than Lexus Structural Blue.

If factory performance blues are your benchmark, Blue Gem brings that same cobalt energy and sapphire metallic character to any car, from Corvette and Honda to Ford.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.