TeckWrap Berry Red is bright, blazing, and full of personality, perfect for those who want to make a statement. This high-gloss vinyl wrap enhances your vehicle’s look with a bold, professional finish while protecting the underlying paint. TeckWrap’s gloss HD colors provide a smooth, shiny surface without orange peel.

Key Attributes

• Color character: Berry Red (CG49-HD) brings a Gloss finish that updates the vehicle without permanent paintwork.
• Liquid surface effect: polymeric hybrid film construction supports a smooth, consistent finish.
• Trusted adhesive system: weather-resistant acrylic adhesive supports installation and clean removal.
• Installation support: air-release channels help align large panels and manage bubbles.
• Conforms under heat: suited for mirrors, bumpers, grilles, and moderate curves when installed correctly.

Berry Red (CG49-HD) Vinyl Wrap is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Comparable to high-energy OEM red paint families used on sports coupes and performance sedans.
• Check the swatch under sunlight and indoor light to confirm saturation.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Gloss finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.