Most whites are cool and clinical. Almond White is the warm one. We built it as a soft, creamy off-white with a gentle warmth pure white never has, easy on the eye in any light, on a film that takes the rock chips so the finish stays clean and the paint underneath stays factory.

It is a warm, creamy almond white with a soft pearlescent glow, gentler and more inviting than a stark pure white, never blue-cool.

For your vehicle

• Gloss color paint protection film, a warm creamy almond white with a soft pearlescent glow
• Fully opaque pigment for a complete color change, with the factory paint sealed and protected beneath it
• Built to absorb rock chips, road debris, light scratches and chemical staining before any of it reaches the paint
• Self-healing top coat, swirls and fine scratches reflow under heat or sunlight and the white stays even
• Hydrophobic, anti-yellowing and chemical-resistant surface, no separate ceramic coating needed
• Holds the character of a Mercedes designo Cashmere White, a Porsche Ivory, and a Lexus Eminent White Pearl, with the protection layer built into the film
• Backed by a 5-year manufacturer warranty

This warm white comes as a vinyl wrap and as Almond White Color PPF. Vinyl gives the color with a lighter commitment and the freedom to switch later. Almond White carries the color on a stone-chip armor layer, keeping the factory paint protected as the cream goes on. The deciding question is whether you want the paint protected along with the new shade.

Built for refined luxury and executive builds whose owners want a warm, soft white and a paint surface that stays pristine beneath it.

For installers

• Aliphatic TPU base for impact resistance and long-term dimensional stability
• Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
• 344 μm total film thickness, 194 μm application layer, true PPF-class stone-chip defense
• 0% light transmission, fully opaque pigmented film for a complete color change
• 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
• 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
• Low-tack acrylic PSA with full repositioning capability during install
• Ultra micro-grooved PET liner with air-release channels, dry-install system
• Faster install than wet-application PPF, with cleaner first-pass results
• 5-year manufacturer warranty, fully traceable for installers

Film Construction

• Film Type: Color PPF aliphatic TPU paint protection film
• Film Thickness: 180-220 um
• Release Liner: Air-release liner for dry installation
• Adhesive: Low-tack acrylic pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +90°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Up to 5 years depending on film line, climate, exposure, and maintenance.

• Application temperature: +18°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: painted panels, bumpers, mirrors, and moderate curves
• Post-heat: 80-90°C where required
• Cure: 24-48 hrs after installation
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.