TeckWrap Vita15 (SC15-3mil) is a dark Skin Care nano-ceramic side window film built for drivers who want maximum privacy with the highest heat rejection in the Vita series. At 15% VLT, it delivers a deep, refined dark tint while blocking 63% of total solar energy and 99% of UV rays.

The 3 mil Skin Care nano-ceramic construction adds extra durability with skin-protective performance, and keeps reflectance ultra-low at just 5% for a stealth, glare-free look. Nano-ceramic technology means full GPS, cell, and radio signal performance with zero interference.

Key attributes:

• Skin Care nano-ceramic dark side window film
• 15% Visible Light Transmission, maximum privacy
• 99% UV rejection, protects skin and interior
• 63% Total Solar Energy Rejected, highest in the Vita series
• 85% IR rejection, blocks infrared heat
• 5% reflectance, ultra-low glare, stealth finish
• 3 mil thickness, extra durability and scratch resistance
• Signal-friendly nano-ceramic, no GPS, cell, or radio interference
• Long-term color stability
• Roll size: 1.52 m × 30 m
• Pairs with Vita70 (windshield) and Vita30 (light tint) for full-vehicle solar defense

Ideal for luxury vehicles, executive sedans, SUVs, ride-share fleets, and privacy-focused drivers, especially in hot climates where heat rejection matters most. Verify local VLT laws before installation, 15% VLT is restricted for front windows in most regions.

Order now. Backed by TeckWrap's decade of automotive film manufacturing experience and worldwide installer network.

Film Construction

• Film Type: Window film automotive window film
• Film Thickness: 2 mil
• Release Liner: Protective release liner
• Adhesive: Optically clear pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +80°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty depends on film series, glass condition, installation method, and local climate.

• Application temperature: +15°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: automotive side glass, rear glass, and windshield applications where allowed
• Post-heat: heat-shrink as needed
• Cure: allow full drying before heavy cleaning
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.