Specifications High-grade polymeric and cast vinyl film for printing (Solvent & Latex) High-grade polymeric vinyl film Color: white Finish: gloss or matte + laminate Thickness of film: 0.005±0.01mm / Basic weight: 100±10g/m2 The thickness of release liner: 0.16±0.01mm / Basic weight: 140±10 g/m2 Series: 270 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Temperature range: -5～80℃ Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001) Package: Roll width 152 or 137 cm, length 39m/ 40m, weight 16-17 kg

Key Attributes

• Custom graphics ready: made for branding, liveries, and commercial vehicle wraps.
• Print workflow support: designed for professional printing and lamination processes.
• Large-panel format: 1.52 m width supports door, side, and rear graphics.
• Wrap-film handling: suited for smooth and medium-curved surfaces after proper finishing.

TeckWrap Digital Print Media is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Use TeckWrap Digital Print Media beside the factory paint under natural light to confirm the match.
• Use rolls from the same production LOT for consistent color across a full wrap.

Film Construction

• Film Type: Printable polymeric vinyl wrap film
• Film Thickness: 100-120 um
• Release Liner: Stable release liner for print and lamination workflows
• Adhesive: Solvent-based acrylic adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Outdoor durability depends on ink, lamination, exposure, and maintenance.

• Application temperature: +16°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: commercial graphics, fleet wraps, and smooth or medium-curved panels
• Post-heat: 90-100°C on recessed areas
• Cure: 24 hrs after lamination and installation
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.