TeckWrap's Sunset Pink K03-2.5mil Window Film provides a perfect balance of heat rejection, UV protection, and energy conservation for your vehicle. Designed to block 35-65% of solar heat and protect you from 99% of harmful UV rays, this film improves comfort, reduces energy usage, and preserves your car's interior. With a 71% visible light transmission (VLT), it offers clear visibility while protecting against glare and fading.

Key Attributes

• Cabin comfort: helps reduce solar heat and glare during daily driving.
• UV protection: helps slow interior fading and reduce UV exposure.
• Clear visibility: balances privacy, shade, and road visibility by film shade.
• Installer-ready: designed for automotive glass and heat-shrinking workflows.

Sunset Pink K03-2.5mil Car Window film is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Comparable to custom OEM purple, lavender, and rubystar-style paint families.
• Lighting can change the perceived tone, so physical swatch review is recommended.

Film Construction

• Film Type: Window film automotive window film
• Film Thickness: 2 mil
• Release Liner: Protective release liner
• Adhesive: Optically clear pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +80°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty depends on film series, glass condition, installation method, and local climate.

• Application temperature: +15°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: automotive side glass, rear glass, and windshield applications where allowed
• Post-heat: heat-shrink as needed
• Cure: allow full drying before heavy cleaning
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.