Enhance your driving experience with TeckWrap Ceramic Window Film C30-2mil, engineered for maximum performance, style, and protection. Designed to block heat, reduce glare, and shield against harmful UV rays, this film transforms your vehicle into a cooler, safer, and more stylish environment. Why Choose C30-2mil Ceramic Window Film?

Key Attributes

• Cabin comfort: helps reduce solar heat and glare during daily driving.
• UV protection: helps slow interior fading and reduce UV exposure.
• Clear visibility: balances privacy, shade, and road visibility by film shade.
• Installer-ready: designed for automotive glass and heat-shrinking workflows.

Ceramic window film C30-2mil Window film is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Use Ceramic beside the factory paint under natural light to confirm the match.
• Use rolls from the same production LOT for consistent color across a full wrap.

Film Construction

• Film Type: Window film automotive window film
• Film Thickness: 2 mil
• Release Liner: Protective release liner
• Adhesive: Optically clear pressure-sensitive adhesive
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -40°C to +80°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty depends on film series, glass condition, installation method, and local climate.

• Application temperature: +15°C to +25°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: automotive side glass, rear glass, and windshield applications where allowed
• Post-heat: heat-shrink as needed
• Cure: allow full drying before heavy cleaning
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.