TeckWrap Black I20-2.5mil is a medium-tint magnetron sputtering window film with 22% VLT, designed for drivers who want strong heat rejection and a refined dark finish without going to the deepest tint. Magnetron sputtering construction delivers 92% IR rejection while keeping the film optically clear with no haze.

The 2.5 mil thickness adds extra shatter protection and durability, and the low 6% internal reflectance keeps glare in check for safer driving.

Key attributes:

• Medium-tint magnetron sputtering window film, 22% VLT
• 99% UV rejection, protects skin and interior
• 63% Total Solar Energy Rejected for strong cabin cooling
• 92% infrared rejection, blocks the heat-causing portion of sunlight
• 6% internal reflectance, low glare for clear visibility
• 2.5 mil thickness, extra shatter protection and durability
• Premium magnetron sputtering construction for distortion-free optical clarity
• Long-term color stability

Ideal for side windows and rear windshields on luxury sedans, SUVs, and any vehicle where strong heat rejection, moderate privacy, and premium aesthetics matter. Verify local VLT laws before installation, 22% VLT may be restricted for front windows in some regions. Backed by TeckWrap's decade of automotive film manufacturing experience and worldwide installer network.

Film Construction

• Film Type: Window film
• Film Thickness: product-specific
• Release Liner: product-specific
• Adhesive: product-specific
• Roll Width: product-specific
• Full Roll Length: product-specific

Performance

• Service temperature: product-specific
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty and use conditions depend on the specific item.

• Application temperature: product-specific
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: consult product use before application
• Post-heat: product-specific
• Cure: product-specific
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.