The TeckWrap PPF Installation Spray is an auxiliary slip solution built specifically for paint protection film

application

. It reduces bubbles and wrinkles during install, lets you reposition the film cleanly, and won't affect adhesive strength or damage the film material. Safe for all TeckWrap PPF products with no sticky residue and no impact on the vehicle's factory finish. Designed to make professional-grade installations faster, smoother, and less frustrating.

Key Attributes

PPF installation slip solution Reduces bubbles and wrinkles during

application

Allows clean film repositioning during install Does not affect adhesive strength Non-corrosive, safe for PPF film and factory paint No sticky residue, no surface marks Compatible with all TeckWrap paint protection film products Easy spray-and-apply format Ideal for professional PPF installers, vinyl wrap specialists, and serious DIYers who want reliable, film-safe slip performance every install.

Film Construction

• Film Type: Vehicle Repair & Specialty Tools
• Film Thickness: product-specific
• Release Liner: product-specific
• Adhesive: product-specific
• Roll Width: product-specific
• Full Roll Length: product-specific

Performance

• Service temperature: product-specific
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Warranty and use conditions depend on the specific item.

• Application temperature: product-specific
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: consult product use before application
• Post-heat: product-specific
• Cure: product-specific
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.