Maize Pink (DS06-HD) is a sophisticated color-shift finish that blends soft blush pink, champagne gold, rose gold, and delicate peach tones into one highly reflective surface. At first glance, the wrap appears as an elegant dusty rose with subtle golden warmth. As light moves across the bodywork, layers of pink pearl, champagne, apricot, and rose-gold reflections emerge simultaneously, creating exceptional depth and a liquid-metal appearance. In shade and overcast conditions, the color becomes softer and more refined, resembling a muted blush or porcelain rose finish with creamy undertones. Under direct sunlight, the metallic pigments become significantly more expressive, transforming the surface into a glowing mixture of pink pearl and warm champagne reflections that continuously move across every curve and body line. Unlike conventional pink wraps that can appear playful or overly feminine, DS06-HD maintains a distinctly luxurious and mature character. The combination of soft pink and warm metallic gold creates a finish that feels closer to bespoke ultra-luxury paint than a traditional color-shift film.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Film finish
• Film Thickness: 0.14 mm
• Release Liner: 142 um plastic liner for HD high-gloss films
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 95-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.