Training / Practice Material This product is offered for training, testing, or non-commercial use. It may have extended storage age. No warranty or claims are provided.

Key Attributes

• Color character: CM02 Training Roll (White Matte) brings a Matte finish that updates the vehicle without permanent paintwork.
• Liquid surface effect: polymeric hybrid film construction supports a smooth, consistent finish.
• Trusted adhesive system: weather-resistant acrylic adhesive supports installation and clean removal.
• Installation support: air-release channels help align large panels and manage bubbles.
• Conforms under heat: suited for mirrors, bumpers, grilles, and moderate curves when installed correctly.

CM02 Training Roll (White Matte) is positioned to change the vehicle's character while keeping the original paint intact.

OEM Match

• Comparable to warm OEM ivory and cream-white luxury paint families.
• Deeper than crisp white and more ivory-toned than bright diamond white.
• Best checked beside the vehicle paint under natural light before a full wrap.

Film Construction

• Film Type: Premium polymeric hybrid vinyl film with air-release channels and Matte finish
• Film Thickness: 0.11 mm
• Release Liner: silicone-coated release liner
• Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, 12 um dry
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service temperature: -30°C to +45°C
• Release force: 0.18 N/25mm (standard 0.10-0.30)
• Initial tack: 1015 g/25mm (standard 800-1500)
• Peel strength (180°): 8.1 N/25mm (standard >=4.9)
• Adhesion strength: 70 (standard >=60, no shifting)
• Aging tested: high and low temperature release without adhesive residue
• Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

• Built for long-term outdoor use, commonly up to 3 years on vertical panels and around 2 years across a full wrap depending on climate and maintenance.

• Application temperature: +17°C to +23°C
• Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90-100°C
• Cure: 24 hrs above 10°C; 48 hrs at room temperature recommended
• Overlap: 3-4 mm
• Non-directional film.
• Clean, degrease, and dry the surface before installation.
• Remove the protective cap or PET protective layer before applying heat.
• Aftercare: use pH-neutral products and avoid hot wax or strong solvents.

TeckWrap statements, technical information, and recommendations are based on product testing believed to be reliable, but they do not guarantee identical results in every installation environment. The buyer should confirm suitability for the intended vehicle and use.

Screen images may vary from the physical film. Always check a real color swatch before ordering, and use rolls from the same production LOT for full-wrap color consistency.

Film performance depends on storage, surface preparation, installation method, climate, and maintenance. Scratches during installation or daily use, labor, transportation, and consequential damages are not covered by standard product warranty.